Open topic · lesson 3 of 4 · 11 min
AI and water
Cooling a data center can take a great deal of water. Learn where it goes, why location matters more than totals, and what to look for.
- Explain why data centers use water
- Distinguish direct from indirect water use
- Distinguish withdrawal from consumption
Why data centers use water
Computers turn electricity into heat, and that heat has to go somewhere. Evaporative cooling removes heat by evaporating water, which uses relatively little electricity but consumes the water. Closed-loop and air-cooled systems recirculate water or use air instead, which saves water but usually takes more electricity. Newer designs pipe liquid directly to the chips. Every design trades water against power, and the right balance depends on the local climate and water supply.
Water withdrawn from a source and not returned to it, most often because it evaporated during cooling. It is different from withdrawal, where water is taken and later returned.
Two true numbers can sit side by side. Google estimated a median Gemini text prompt used about 0.26 milliliters of water, about five drops. Reporting on the company's disclosures also found that a single Google facility in Council Bluffs, Iowa used about 1 billion gallons in 2024. Tiny per use and very large in one place are both accurate, and a community lives with the second number.
Direct and indirect water
Lawrence Berkeley National Laboratory estimated that U.S. data centers directly consumed about 17 billion gallons of water for cooling in 2023, and that this could double or even quadruple by 2028. The same research estimated about 211 billion gallons were consumed indirectly, by the power plants generating the electricity those data centers used. That is roughly 12 times the direct figure, which means the source of a data center's electricity matters for water, not only for emissions.
Where and when matters more than how much
Withdrawal is water taken from a source and later returned. Consumption is water that is not returned, usually because it evaporated. A gallon consumed in a drought-stressed basin in August is not the same as a gallon from an abundant source in winter. Whether a facility uses drinking-quality water or reclaimed water matters too. Public reporting is uneven: companies often publish totals across all their facilities, not the figures for the one being built near you.
Find the water in a proposal
Take a data center project you have read about, or a hypothetical one, and identify the facts you would need about its water.
If the information is not public, that is a finding. Write it down as a question.
0 of 5 practice steps checked. Saved on this device.
An illustrative checklist result: cooling type stated as hybrid; annual water use not disclosed; source is the municipal system; the basin had drought restrictions two of the last five summers; no commitment to annual reporting. Three of the five answers are questions for the next public meeting.
Check your understanding
Answer both to mark the lesson complete. You can try again. This is practice, not a graded exam.
1. For U.S. data centers in 2023, which was larger according to Lawrence Berkeley National Laboratory?
2. What is the difference between water withdrawal and water consumption?
Three things to remember
- Cooling trades water against electricity; no option comes without a trade-off.
- Indirect water through power generation can exceed direct cooling water.
- Ask where the water comes from, what kind it is, and whether use will be reported every year.

A plain-language guide to AI for every mind, every age, and every community.
Examples are composites written for teaching unless a source is cited. Figures come from the sources listed where given.
